If build this and apply it in some way (although it is illuminating a
corner of your home or garden) Communicate and document it in a comment for others to see
.
< p >
2 - The paste is spread throughout the glass leaving a thin layer (about 10 micrometers).
3 - The thin layer of titanium dioxide is heated and changes color to unite with the electrolyte.
4 - On the other piece of glass applied a bit of graphite in a pencil.
5 - With a clip, join the two pieces of glass that is caused by pressure between them.
6 - A drop of electrolyte is moving between the crystals, the board is alive!.
7 - The panels are connected in series as seen in the image:
8 - Another view most enlightening, this time connected to a calculator with several cells:
Guns N 'Roses - November Rain (subtitulado) corner of your home or garden) Communicate and document it in a comment for others to see
.
< p >
Procedure:
1 - Put the paste of titanium dioxide on glass shards, as shown in the image: 2 - The paste is spread throughout the glass leaving a thin layer (about 10 micrometers).
3 - The thin layer of titanium dioxide is heated and changes color to unite with the electrolyte.
4 - On the other piece of glass applied a bit of graphite in a pencil.
5 - With a clip, join the two pieces of glass that is caused by pressure between them.
6 - A drop of electrolyte is moving between the crystals, the board is alive!.
7 - The panels are connected in series as seen in the image:
8 - Another view most enlightening, this time connected to a calculator with several cells:
No comments:
Post a Comment